Certified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China
X1NiCrMoCu25-20-5
X1NiCrMoCu25-20-5 material is AFNOR NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels AFNOR NF EN 10088-1 Stainless steels - Part 1: List of stainless steels AFNOR NF EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes AFNOR NF EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes AFNOR NF EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes AFNOR NF EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes AFNOR NF EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes AFNOR NF EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes AFNOR NF EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels AFNOR NF EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements AFNOR NF EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements AFNOR NF EN 10272 Stainless steel bars for pressure purposes AFNOR NF EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel AFNOR NF EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel.
Chemical composition of X1NiCrMoCu25-20-5, X1NiCrMoCu25-20-5 mechanical properties, X1NiCrMoCu25-20-5 datasheet, X1NiCrMoCu25-20-5 equivalent grade, Heat treatment and temperature process of X1NiCrMoCu25-20-5.
X1NiCrMoCu25-20-5 property sheet
X1NiCrMoCu25-20-5 Spec.
| AFNOR NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| AFNOR NF EN 10088-1 Stainless steels - Part 1: List of stainless steels |
| AFNOR NF EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| AFNOR NF EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| AFNOR NF EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| AFNOR NF EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| AFNOR NF EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| AFNOR NF EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| AFNOR NF EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| AFNOR NF EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| AFNOR NF EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| AFNOR NF EN 10272 Stainless steel bars for pressure purposes |
| AFNOR NF EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| AFNOR NF EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
Related Materials
| X1NiCrMoCu25-20-5 |
| 1.4539 |
| X1NiCrMoCu25-20-5 |
| 1.4539 |
| X1NiCrMoCu25-20-5, 1.4539, AISI 904L, N08904 |
Chemical Composition of X1NiCrMoCu25-20-5
| C: | Max | 0.020 |
| Si: | Max | 0.70 |
| Mn: | Max | 2.00 |
| P: | Max | 0.030 |
| S: | Max | 0.010 |
| Cr: | 19.00 | 21.00 |
| Mo: | 4.00 | 5.00 |
| Ni: | 24.00 | 26.00 |
| N: | Max | 0.15 |
| Cu: | 1.20 | 2.00 |
Mechanical Properties of X1NiCrMoCu25-20-5
| Rp0.2 (MPa) | 371 (≥) |
| Rm (MPa) | 573 (≥) |
| AKV (J) | 42 |
| A (%) | 21 |
| Z (%) | 41 |
| Hardness | HBW 241 |
X1NiCrMoCu25-20-5 shape and dimensions
| X1NiCrMoCu25-20-5 Round bar: | 1mm-800mm |
| X1NiCrMoCu25-20-5 Square bar: | 10mm * 10mm-600mm *600mm |
| X1NiCrMoCu25-20-5 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
| X1NiCrMoCu25-20-5 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
| X1NiCrMoCu25-20-5 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
| X1NiCrMoCu25-20-5 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |
©Longhai Special Steel 2024
