High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

ISO 19


ISO 19 material is ISO ISO 15510 (2010) Stainless steels -- Chemical composition ISO ISO 16143-1 (2004) Stainless steels for general purposes -- Part 1: Flat products ISO ISO 16143-2 (2004) Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections ISO ISO 16143-3 (2005) Stainless steels for general purposes -- Part 3: Wire ISO ISO 9328-7 (2011) Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels ISO ISO/TS 15510 (2003) Stainless steels - Chemical composition Stainless steels - Chemical composition.

Chemical composition of ISO 19, ISO 19 mechanical properties, ISO 19 datasheet, ISO 19 equivalent grade, Heat treatment and temperature process of ISO 19.


ISO 19 property sheet

ISO 19 Spec.

ISO ISO 15510 (2010)
Stainless steels -- Chemical composition
ISO ISO 16143-1 (2004)
Stainless steels for general purposes -- Part 1: Flat products
ISO ISO 16143-2 (2004)
Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections
ISO ISO 16143-3 (2005)
Stainless steels for general purposes -- Part 3: Wire
ISO ISO 9328-7 (2011)
Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels
ISO ISO/TS 15510 (2003)
Stainless steels - Chemical composition

Related Materials

ISO 19
ISO 19A
ISO 19N
ISO 19AN

Chemical Composition of ISO 19

C: Max 0.03
Si: Max 1.00
Mn: Max 2.00
P: Max 0.045
S: Max 0.030
Cr: 16.00 18.00
Ni: 10.00 13.00
Mo: 2.00 3.00
N: Max 0.11

Mechanical Properties of ISO 19

Rp0.2 (MPa) 159 (≥)
Rm (MPa) 957 (≥)
AKV (J) 43
A (%) 23
Z (%) 23
Hardness HBW 311

ISO 19 shape and dimensions

ISO 19 Round bar: 1mm-800mm
ISO 19 Square bar: 10mm * 10mm-600mm *600mm
ISO 19 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
ISO 19 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
ISO 19 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
ISO 19 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes