High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

ISO 11


ISO 11 material is ISO ISO 16143-1 (2004) Stainless steels for general purposes -- Part 1: Flat products ISO ISO 16143-2 (2004) Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections ISO ISO 16143-3 (2005) Stainless steels for general purposes -- Part 3: Wire ISO ISO 6931-2 Stainless steels for springs - Part 2: Narrow strip ISO ISO 9327-5 Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels ISO ISO 9328-5 Steel plates and strips for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled ISO ISO 9329-4 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels ISO ISO 9330-6 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes ISO ISO/TS 15510 (2003) Stainless steels - Chemical composition Stainless steels - Chemical composition.

Chemical composition of ISO 11, ISO 11 mechanical properties, ISO 11 datasheet, ISO 11 equivalent grade, Heat treatment and temperature process of ISO 11.


ISO 11 property sheet

ISO 11 Spec.

ISO ISO 16143-1 (2004)
Stainless steels for general purposes -- Part 1: Flat products
ISO ISO 16143-2 (2004)
Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections
ISO ISO 16143-3 (2005)
Stainless steels for general purposes -- Part 3: Wire
ISO ISO 6931-2
Stainless steels for springs - Part 2: Narrow strip
ISO ISO 9327-5
Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels
ISO ISO 9328-5
Steel plates and strips for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled
ISO ISO 9329-4
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
ISO ISO 9330-6
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
ISO ISO/TS 15510 (2003)
Stainless steels - Chemical composition

Related Materials

ISO 11

Chemical Composition of ISO 11

C: Max 0.07
Si: Max 1.00
Mn: Max 2.00
P: Max 0.045
S: Max 0.030
Cr: 17.00 19.50
Ni: 8.00 10.50
Mo: Max Min
N: Max 0.11

Mechanical Properties of ISO 11

Rp0.2 (MPa) 373 (≥)
Rm (MPa) 612 (≥)
AKV (J) 44
A (%) 22
Z (%) 22
Hardness HBW 144

ISO 11 shape and dimensions

ISO 11 Round bar: 1mm-800mm
ISO 11 Square bar: 10mm * 10mm-600mm *600mm
ISO 11 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
ISO 11 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
ISO 11 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
ISO 11 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes