High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

1.0614


1.0614 material is EN EN 10016-2 (1994) Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod EN EN ISO 16120-2 (2011) Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod.

Chemical composition of 1.0614, 1.0614 mechanical properties, 1.0614 datasheet, 1.0614 equivalent grade, Heat treatment and temperature process of 1.0614.


1.0614 property sheet

1.0614 Spec.

EN EN 10016-2 (1994)
Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod
EN EN ISO 16120-2 (2011)
Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod

Related Materials

1.0614

Chemical Composition of 1.0614

C: 0.73 0.78
Si: 0.10 0.30
Mn: 0.50 0.80
P: Max 0.035
S: Max 0.035
Cr: Max 0.15
Ni: Max 0.20
Cu: Max 0.25

Mechanical Properties of 1.0614

Rp0.2 (MPa) 822 (≥)
Rm (MPa) 534 (≥)
AKV (J) 31
A (%) 24
Z (%) 11
Hardness HBW 311

1.0614 shape and dimensions

1.0614 Round bar: 1mm-800mm
1.0614 Square bar: 10mm * 10mm-600mm *600mm
1.0614 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
1.0614 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
1.0614 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
1.0614 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes