High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

10CrNi3MoV


10CrNi3MoV material is JB JB/T5000.15-2007II Heavy mechanical general techniques and standards-Part 15:Non-destructive inspection of forged steel Heavy mechanical general techniques and standards-Part 15:Non-destructive inspection of forged steel.

Chemical composition of 10CrNi3MoV, 10CrNi3MoV mechanical properties, 10CrNi3MoV datasheet, 10CrNi3MoV equivalent grade, Heat treatment and temperature process of 10CrNi3MoV.


10CrNi3MoV property sheet

10CrNi3MoV Spec.

JB JB/T5000.15-2007II
Heavy mechanical general techniques and standards-Part 15:Non-destructive inspection of forged steel

Related Materials

10CrNi3MoV

Chemical Composition of 10CrNi3MoV

C: 0.07 0.14
Si: 0.17 0.37
Mn: 0.30 0.60
P: Max 0.012
S: Max 0.01
Cr: 0.90 1.20
Ni: 2.60 3.00
Mo: 0.20 0.27
Cu: Max 0.1
V: 0.04 0.10
H: Max 2PPM
O: Max 20PPM
N: Max 70PPM

Mechanical Properties of 10CrNi3MoV

Rp0.2 (MPa) 352 (≥)
Rm (MPa) 295 (≥)
AKV (J) 14
A (%) 21
Z (%) 22
Hardness HBW 241

10CrNi3MoV shape and dimensions

10CrNi3MoV Round bar: 1mm-800mm
10CrNi3MoV Square bar: 10mm * 10mm-600mm *600mm
10CrNi3MoV Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
10CrNi3MoV Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
10CrNi3MoV Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
10CrNi3MoV Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes