Current Location:Home >> Alloy steel > 12Ni19

12Ni19

Data Table for:Alloy steel:12Ni19

Steel grade type Alloy steel:
Standard
Production specifications Steel plate,Sheet, Coil,Flat bar,Round bar, Strip steel,wire,All kinds of forgings.
Mchining Turning
Milling
Grinding
Deep hole drilling: length max 9.8 meters.
Range of work

Round bar steel: 1mm to 2000mm

Square-shape steel: 10mm to 1000mm

steel Plate/sheet:0.08mm to 800mm

Width: 10mm to 1500mm

Lenth: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ4-410 mm, with wall thickness ranging from 1-35 mm.

Heat treatment Normalizing,Annealing,Tempering,Quenching,Hardening and tempering,Seasoning,Surface hardening,Carburizing

12Ni19 Chemical composition and Mechanical properties

C
Si
Mn
P
S
Cr Ni
0.15  0.35  0.30-0.80  0.020  0.010    4.75-5.25 
Mo Al Cu Nb Ti V Ce
          0.05   
N Co Pb B Other    
        Cr+Ni+Mo 0.50%    
             

 

German DIN of low-temperature steel GangHao and chemical composition

LenMainly used for the construction of the low temperature LNG tanks, belong to the low-temperature steel 2 | comments approval
Ensure that its quench-hardening ability structural steel grades: 20 CrMnTiH standard GB/T 5216-1985 "chemical ingredients: carbon C: 0.17 ~ 0.23 Si Si: 0.17 ~ 0.37 Mn Mn: 0.80 ~ 1.15 sulfur S: allow residual content than 0.035 P P: allow residual content than 0.035 chromium Cr: 1.00 ~ 1.35 Ni Ni: allow residual content than 0.030 copper Cu: allow residual content than 0.030 titanium Ti: 0.04 ~ 0.10" mechanical properties: hardness: annealing or high temperature tempering, than 217 HB, diameter of 4.1 mm creasing frequency "heat treatment standards and analysis of metallographic organization:" delivery status: rolling or forging system state delivery. According to buyer's request can also heat treatment (is fire, annealed or high temperature tempering) state delivery. Delivery status should be indicated in the contract.

th: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ4-410 mm, with wall thickness ranging from 1-35 mm.

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement

Excellent service for all kinds of industries,with advantages of technologies, equipment and price.

We serve you with our honesty, integrity, and professionality.

Mechanical properties

ViTa llium Mechanical properties,Our production completely according to the ViTa llium standards to meet the ViTa llium mechanical performance, can also according to the customer request, to meet the requirements of customers of ViTa llium mechanical properties.

Heat treatment

ViTa llium Heat treatment,Our production completely according to the ViTa llium standards to meet the ViTa llium Heat treatment, can also according to the customer request, to meet the requirements of customers of ViTa llium Heat treatment.

Machining

ViTa llium Machining,Our production completely according to the ViTa llium standards to meet the ViTa llium Machining, can also according to the customer request, to meet the requirements of customers of ViTa llium Machining.

Welding performance

ViTa llium Welding performance,Our production completely according to the ViTa llium standards to meet the ViTa llium Welding performance, can also according to the customer request, to meet the requirements of customers of ViTa llium Welding performance.
 

Related hot word search:ViTa llium ViTa llium steel plates, flat steel,sheet,coil,steel wire,round rods, ViTa llium Strip



ELECTRODE ARC FURNACE; (NON)VACUUM INDUCTION FURNACE; LF; VD; VOD; ESR; CONSUMABLE ELECTRODE VACUUM FURNACE.

Mechanical Properties

Properties Conditions
T (°C) Treatment
Density (×1000 kg/m3) 7.7-8.03 25  
Poisson's Ratio 0.27-0.30 25  
Elastic Modulus (GPa) 190-210 25  
Tensile Strength (Mpa) 1158 25 oil quenched, fine grained, tempered at 425°C
Yield Strength (Mpa) 1034
Elongation (%) 15
Reduction in Area (%) 53
Hardness (HB) 335 25 oil quenched, fine grained, tempered at 425°C

Thermal Properties

Properties Conditions
T (°C) Treatment
Thermal Conductivity (W/m-K) 42.7 100  
Specific Heat (J/kg-K) 477 50-100  
Physical Properties
Quantity Value Unit
Thermal expansion 16 - 17 e-6/K
Thermal conductivity 16 - 16 W/m.K
Specific heat 500 - 500 J/kg.K
Melting temperature 1370 - 1400 °C
Service temperature 0 - 500 °C
Density 8000 - 8000 kg/m3
Resistivity 0.7 - 0.7 Ohm.mm2/m

Hot keywords:12Ni19

Previous page:1.5680
Next page1.5680

Favorite