Current Location:Home >> Alloy steel > 1.6212

1.6212

Data Table for:Alloy steel:1.6212

Steel grade type Alloy steel:
Standard
Production specifications Steel plate,Sheet, Coil,Flat bar,Round bar, Strip steel,wire,All kinds of forgings.
Mchining Turning
Milling
Grinding
Deep hole drilling: length max 9.8 meters.
Range of work

Round bar steel: 1mm to 2000mm

Square-shape steel: 10mm to 1000mm

steel Plate/sheet:0.08mm to 800mm

Width: 10mm to 1500mm

Lenth: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ4-410 mm, with wall thickness ranging from 1-35 mm.

Heat treatment Normalizing,Annealing,Tempering,Quenching,Hardening and tempering,Seasoning,Surface hardening,Carburizing

1.6212 Chemical composition and Mechanical properties

C
Si
Mn
P
S
Cr Ni
0.14  0.50  0.70-1.50  0.025  0.015    0.30-0.80 
Mo Al Cu Nb Ti V Ce
   0.020    0.05    0.05  
N Co Pb B Other    
             
             

 

German DIN of low-temperature steel GangHao and chemical composition

 

GangHao (1) : 13 MnNi6-3

 

Materials, W-Nr. : 1.6217

 

C (%) : more than 0.16

 

Si (%) : more than 0.50

 

Mn (%) : 0.85 ~ 1.70

 

P (%) than: 0.025

 

S (%) than: 0.015

 

Cr (%) :-

 

Ni (%) : 0.30 ~ 0.85

 

V (%) : more than 0.05

 

Other (%) : 0.05 Al acurity of 0.020 or better than Nb

 

The hot working temperature / ℃ : 1100 ~ 850

 

Heat treatment temperature / ℃ | is fire: 880 ~ 940

 

Heat treatment temperature / ℃ | quenching:

 

Heat treatment temperature / ℃ | tempering: 580 ~ 640

 

Normal temperature and low temperature mechanical properties | state: at room temperature

 

Normal temperature and low temperature mechanical properties | σ b/MPa: 490 ~ 610

 

Normal temperature and low temperature mechanical properties | σ s frequency/MPa: 345

 

Normal temperature and low temperature mechanical properties | δ 5 (%) frequency: 22

 

Normal temperature and low temperature mechanical properties | ψ (%) frequency:--

 

Normal temperature and low temperature mechanical properties | AKV (DVM) / J: 65

 

The main alloy steel elements have silicon, manganese, chromium, nickel, tungsten, molybdenum, vanadium, titanium, niobium and zirconium, cobalt, aluminum, copper, boron, rare earth, etc. Which vanadium, titanium, niobium and zirconium, etc in steel is strong carbide form elements, as long as there is enough carbon, in the right conditions, to shape their own carbide, when lack of carbon or in high temperature conditions, the one with atomic state into the crystallology; Mn, chromium, tungsten, molybdenum carbide form elements for, some of the atoms in the state to enter the crystallology, another part of form replacement type alloy cementite; Aluminum, copper, nickel, cobalt, silicon carbide is not formed elements, general with atomic state exists in the crystallology. Free cutting steel: in steel join a certain number of one or more than one type of sulphur, phosphorus, lead, calcium, selenium, tellurium and cutting elements to improve its cutting sex of alloy. Also called the automatic machine processing steel, hereinafter referred to as automatic steel. This kind of steel can use high cutting speed and large cutting depth cutting processing. Because of the free cutting steel join element, make steel cutting resistance decreased, and cutting element characteristics of itself and by the formation of the compounds for lubrication cutting tool role, brittle flocks, reducing wear and thus reduce the workpiece surface roughness and the tool life and improve the production efficiency. Spring steel is mainly have good elasticity, and because it is in the dynamic loading environment conditions of the job, so to make the material of spring the main should have high yield strength; Under heavy load in does not cause the plastic deformation; Should have high fatigue strength, load under the action of repeated in with long service life; And have enough toughness and plastic, in case in the impact a role brittle fracture.
 

Introduction to Our Products:

Production equipment and steel specification, etc
My company can provide more than 350 12 categories, more than 5,000 grades, from the top quality specification group of special steel metal materials.
Smelting equipment: furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode., 0.5 tons - 40 tons), vacuum induction furnace capacity 0.5-10 tons and tons ESR 0.35 tons - 8 tons.
Pressure: forging maxhine 1200 tons - 8,000 tons, 825 type, type, type of 250 650 mill.
polishing machine machining: Φ1- Φ 300, Φ sheller Φ 180; 60 - Car light lathe than 12 meters length, diameter, deep drilling than 12 meters length than 12 meters.

Type: ordinary and ingot ingots refining ingot 0.5 tons - 25 tons. Electricity slag remelting ingot 0.35-8 tons and tons of
Size: round bar rolling material Φ 1.0-280. Forging materials Φ 80-600, Φ diameter steel (Φ1 - Φ 235) x (thickness); 0.5-40. Sheet (0.5-12) x 1000 * 2000, Medium thickness plate rolling, forging, width: experiment.it than 610, Alien: fang, flat, ring, canister, steps axis, etc.
Heat: can provide annealing, normalizing, tempering, quenching, aging, piece.modified special requirements such as heat treatment process delivery of products.

Introduction to Our Products:

Specialized high quality steel

We have the advantages of equipment, technologies and price

Forging/hot rolling/ extrusion of steel

Specifications:

Round bar steel: 1mm to 2000mm

Square-shape steel: 10mm to 1000mm

Plate steel:0.08mm to 800mm

Width: 10mm to 1500mm

Lenth: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ3-730 mm, with wall thickness ranging from 0.3-120mm.

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement

Excellent service for all kinds of industries,with advantages of technologies, equipment and price.

We serve you with our honesty, integrity, and professionality.

Mechanical properties

ViTa llium Mechanical properties,Our production completely according to the ViTa llium standards to meet the ViTa llium mechanical performance, can also according to the customer request, to meet the requirements of customers of ViTa llium mechanical properties.

Heat treatment

ViTa llium Heat treatment,Our production completely according to the ViTa llium standards to meet the ViTa llium Heat treatment, can also according to the customer request, to meet the requirements of customers of ViTa llium Heat treatment.

Machining

ViTa llium Machining,Our production completely according to the ViTa llium standards to meet the ViTa llium Machining, can also according to the customer request, to meet the requirements of customers of ViTa llium Machining.

Welding performance

ViTa llium Welding performance,Our production completely according to the ViTa llium standards to meet the ViTa llium Welding performance, can also according to the customer request, to meet the requirements of customers of ViTa llium Welding performance.
 

Related hot word search:ViTa llium ViTa llium steel plates, flat steel,sheet,coil,steel wire,round rods, ViTa llium Strip

 

Related hot word search:13MnNi6-3 round bar 13MnNi6-3,forging 13MnNi6-3,13MnNi6-3 sheet,coil 13MnNi6-3,13MnNi6-3 flat bar,pipe 13MnNi6-3,13MnNi6-3 Lrregular

 

 

Prev:1.6212
Next:1.6217

 

Mechanical Properties

Properties Conditions
T (°C) Treatment
Density (×1000 kg/m3) 7.7-8.03 25  
Poisson's Ratio 0.27-0.30 25  
Elastic Modulus (GPa) 190-210 25  
Tensile Strength (Mpa) 1158 25 oil quenched, fine grained, tempered at 425°C
Yield Strength (Mpa) 1034
Elongation (%) 15
Reduction in Area (%) 53
Hardness (HB) 335 25 oil quenched, fine grained, tempered at 425°C

Thermal Properties

Properties Conditions
T (°C) Treatment
Thermal Conductivity (W/m-K) 42.7 100  
Specific Heat (J/kg-K) 477 50-100  
Physical Properties
Quantity Value Unit
Thermal expansion 16 - 17 e-6/K
Thermal conductivity 16 - 16 W/m.K
Specific heat 500 - 500 J/kg.K
Melting temperature 1370 - 1400 °C
Service temperature 0 - 500 °C
Density 8000 - 8000 kg/m3
Resistivity 0.7 - 0.7 Ohm.mm2/m

Hot keywords:1.6212

Previous page:11MnNi5-3
Next page13MnNi6-3

Favorite